RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
The APC Rack Automatic Transfer Switch (ATS) AP7721 is a high availability switch that provides redundant power to connected equipment and has two input power cords, one for each AC source. The output configuration is (12) IEC 60320 C13 The Rack ATS supplies power to the connected load from a primary AC source. If that primary source becomes unavailable, the Rack ATS automatically transfers loads to the secondary source. The transfer time from one source to the other is seamless to the connected equipment, as the switching occurs safely between the two input sources regardless of any phase differences. The units have built-in network connectivity, which allows for remote management through Web, SNMP, SHH, Telnet, or StruxureWare™ Data Center Expert. With multiple outlets, several devices can be plugged directly into the Rack ATS without the need for an additional Rack PDU. Current monitoring and alarms help prevent downtime to the equipment by providing aggregate current measurements and warnings when power consumption draws near the maximum rating of the Rack ATS. Built-in network and local interfaces allow for custom configuration settings for added flexibility.
Includes: Mounting hardware, Rack mounting brackets, Serial configuration cable
Key Features
Rack Height
2U
Output Connections
(12) IEC 60320 C13
Input Connections
IEC 60320 C14
10 kAIC Overcurrent Protection
Provides protection in the event of a significant overcurrent event.
Command line interface
Offers simultaneous remote management access through Telnet and SSH
Current Monitoring
Monitors the aggregate current draw per power distribution unit.
Cyber security
A cyber-secure connection provides improved security for your infrastructure devices, and machine data forms the basis of operational insights and analytics, aimed at reducing equipment maintenance costs
Local Current Monitoring Display
The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)
Quick Transfer Rate
Transfer rate is within the industry standard and within the time power supplies will typically drop loads. The transfer of one power source to another is seamless to the connected equipment avoiding disruption of equipment performance.
Remote Management Capabilities
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
RoHS
Certifies that electronic devices don't contain hazardous metals and flame retardants
StruxureWare Data Center Expert compatible
Enables centralized management via StruxureWare Data Center Expert.
10 kAIC Overcurrent Protection
Provides protection in the event of a significant overcurrent event.
Color LCD display
Provides more robust and intuitive local control and manageability.
Network Management Capabilities
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
Rack-Mountable
Occupys only 1U of valuable rack space. Puts the power where it is needed most - in the rack near the equipment.
Information Displays
Indicates the status of the AC sources powering the units, as well as indicates which source is set as the primary source and which source is currently supplying power to the load. This provides a visual depiction of the power flow from the input to the load. This allows the user to quickly glance at the power flow and status of the input sources without connecting to the unit.
Wide range of input and output connections
Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 17.3kW using a single branch whip.
Dual Input Power Sources
Supplies redundant AC power to connected equipment. Two AC lines power the unit and if the primary AC power fails, the unit will automatically switch to the alternative power source.
Transfer time <10ms
Industry leading transfer time to ensure seamless ride through in the event of a primary power source failure.
RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
RACK ATS, 230V, 16A, C20 IN, (8) C13 (1) C19 OUT
Key Features
- Provides protection in the event of a significant overcurrent event.
Key Features
- Offers simultaneous remote management access through Telnet and SSH
Key Features
- A cyber-secure connection provides improved security for your infrastructure devices, and machine data forms the basis of operational insights and analytics, aimed at reducing equipment maintenance costs
Key Features
- Monitors the aggregate current draw per power distribution unit.
Key Features
- Transfer rate is within the industry standard and within the time power supplies will typically drop loads. The transfer of one power source to another is seamless to the connected equipment avoiding disruption of equipment performance.
Key Features
- The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)
Key Features
- Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
Key Features
- Certifies that electronic devices don't contain hazardous metals and flame retardants
Key Features
- Enables centralized management via StruxureWare Data Center Expert.
10 kAIC Overcurrent Protection
Provides protection in the event of a significant overcurrent event.
The APC Rack Automatic Transfer Switch (ATS) AP7721 is a high availability switch that provides redundant power to connected equipment and has two input power cords, one for each AC source. The output configuration is (12) IEC 60320 C13 The Rack ATS supplies power to the connected load from a primary AC source. If that primary source becomes unavailable, the Rack ATS automatically transfers loads to the secondary source. The transfer time from one source to the other is seamless to the connected equipment, as the switching occurs safely between the two input sources regardless of any phase differences. The units have built-in network connectivity, which allows for remote management through Web, SNMP, SHH, Telnet, or StruxureWare™ Data Center Expert. With multiple outlets, several devices can be plugged directly into the Rack ATS without the need for an additional Rack PDU. Current monitoring and alarms help prevent downtime to the equipment by providing aggregate current measurements and warnings when power consumption draws near the maximum rating of the Rack ATS. Built-in network and local interfaces allow for custom configuration settings for added flexibility.
Color LCD display
Provides more robust and intuitive local control and manageability.
Includes: Mounting hardware, Rack mounting brackets, Serial configuration cable
Network Management Capabilities
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
Rack-Mountable
Occupys only 1U of valuable rack space. Puts the power where it is needed most - in the rack near the equipment.
10 kAIC Overcurrent Protection
Information Displays
Indicates the status of the AC sources powering the units, as well as indicates which source is set as the primary source and which source is currently supplying power to the load. This provides a visual depiction of the power flow from the input to the load. This allows the user to quickly glance at the power flow and status of the input sources without connecting to the unit.
Wide range of input and output connections
Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 17.3kW using a single branch whip.
Dual Input Power Sources
Supplies redundant AC power to connected equipment. Two AC lines power the unit and if the primary AC power fails, the unit will automatically switch to the alternative power source.
Transfer time <10ms
Industry leading transfer time to ensure seamless ride through in the event of a primary power source failure.
Local Current Monitoring Display
Remote Management Capabilities
StruxureWare Data Center Expert compatible
Five Stars
Great Product
Work good
Work fine
Five Stars
Such a good deal.
Five Stars
My best endorsement is: I'm a repeat buyer!
Great buy!
I go through a lot of UPS and this is a great buy!
Five Stars
these UPS are just ok
Excellent Value and Long Lasting
These really do last a long time. I have bought them more than once and will again. Definitely recommend.
Five Stars
last forever
Write Your Review
APC Make Automatic Transfer Switch 230V, 10A, C14 IN, (12) C13 OUT
Our Feedback